As per the DVSA, few percentages of MOT fail causes include the tyres. You can prevent MOT failure due to the tyres as the tyres can be quickly inspected and replaced. To ensure that the tyres don’t make you fail the MOT, you need to go through this article.
Reasons for mot failure due to tyre
Using the Correct Tyres
If your car is being fitted with the wrong tyres, you can fail in the MOT test due to this. Thus, tyres that are of the correct size as per your car and meet the specifications of your manufacturer handbook must be used by making a comparison of the tyre size printed on the tyre sidewall against the size of the rear as well as the front tyre mentioned in the handbook of the manufacturer.
You must get the tyre replaced before the MOT Twickenham if you have had a tyre puncture recently or use either a lightweight tyre or a space saver. For getting your home or to a garage after facing tyre damage, these tyres have been designed. However, you can’t use them for long or every day. They may also make your car fail the MOT.
The exact structure must be shared by the tyres fit on the same axle. Mixing the asymmetric and directional tyres is not permissible. In addition, the design of the directional tyres is such that they can rotate in a specific direction. The car may also fail in the MOT if you get them fitted incorrectly.
Tread depth of a tyre for MOT
So, let’s know about the MOT requirements. First, it is illegal to use tyres having a tread depth of less than 1.6mm, and this may cause an MOT failure. Apart from this, your driving license may be cancelled by using tyres having illegal depth, and you may also be fined a reasonable amount. Thus, you must check the tyres regularly.
You can quickly check the tread depth of the tyre using the 20p method at your home. The coin has to be placed in the tread grooves in three various places of the tyres. Too low tread in the tyre is indicated if the exterior coin band portion can be seen. Thus, it would help if you got the tyre replaced.
You get the reference of tyre tread information to get proper guidance. You can also consult a local mechanic for a tyre check.
Your tyres’ condition
The usual tyre condition of our tyres is generally inspected during the MOT test. The lumps, bulges or cuts are usually examined as these may cause failure. The tyres must be inspected for any traces of damage every three weeks or before the MOT test.
The tyre damage signs that may cause MOT failure due to tyres are:
- tears, punctures or Cuts
- bulges and Lumps
- Visible cord and ply signs
Your car may fail the MOT and could prove to be risky due to these damages. Thus, a tyre specialist must be consulted to check for the signs.
Run-flat tyres and MOT requirements
All the four tyres on the car will be inspected by law as part of a standard MOT Twickenham. The tyres must be free of damages, sidewall cracks, bulges, tears and maintained in good condition. The tyres must also maintain a legal 1.6 mm tread limit depth. The same thing applies to run-flat tyres. However, for meeting the basic UK MOT requirements, the run-flat tyres must be checked thoroughly to fulfil the basic requirements from 2012.
While the use of run-flat tyres offers numerous benefits, the disadvantage of using such tyres is that your car must be installed with a proper TPMS system to warn you regarding the puncture. The TPMS is also inspected as a part of the MOT. You may fail the test if the TPMS doesn’t work efficiently. The wheel sensors often cause TPMS faults. You can also refer to a tyre guide for further information if you trace any tyre damage or need advice on elongating tyre durability.
You must get your tyres replaced much before if you are tensed about whether your tyres would pass the MOT or not. After that, you can either visit a local garage or search online to purchase new tyres.
