If your Netgear extender is not accepting passwords, then you have to ensure that you are entering them correctly. In the event that you are not sure that you are entering the extender login details correctly, then check the tips highlighted below and get access to your Netgear WiFi range extender in no time. Let’s take the plunge!
Troubleshoot: Netgear Extender Not Accepting Password
Check the Caps Lock Key
The caps lock key can be one of the major reasons behind the “Netgear extender not accepting password” issue. So, before entering the Netgear extender password, make sure that the caps lock key is off. Once you’re done, try to access your Netgear extender again using the default password.
Check the Extender Login Details
On the off chance if you have changed the login details of your device and you are still using the default ones, then also you will face a “Netgear extender not accepting password” issue. So, to cope up with the issue, ensure that you are using the correct Netgear extender login details.
Check the Network
If you are connected to the wrong network and trying to access your extender, then also it will show an incorrect password message. Make sure that you are connected to the correct network i.e. Netgear_Ext (SSID) (unless changed).
Check the Connection
In the event that the connection between your Netgear extender and router is not good then also “Netgear extender not accepting password” issue will appear again and again. Thus, to get it fixed, make sure to connect your devices with each other properly using a wireless connection.
Just in case, the wireless connection does not work for you, connect your router and Netgear extender using an Ethernet cable.
Still the Same?
If the issue remains the same even after following the tips highlighted above, then it seems like you have forgotten the Netgear extender password. Well, in that case, you have to use the “password recovery” feature in order to get the login details back.
Here, how to get the extender login details back using the password recovery feature:
-
Connect your Netgear extender to the router and turn them on.
-
Launch a web browser on your desktop or laptop that is connected to Netgear_Ext (SSID).
-
The extender login page displays.
-
Click on Cancel.
-
The Password Recovery window will appear.
-
Enter your extender’s model number and click on Continue.
-
Answer the security questions.
-
Click on Continue once you’re done.
-
The extender login password will display.
What? You haven’t enabled the password recovery feature or forgot the security answers? Need not worry! The only remedy left to get back the Netgear extender login details is to reset your device back to the default factory settings.
Here, how to reset Netgear extender:
-
Disconnect your Netgear WiFi range extender from the router, desktop, laptop, and mobile device.
-
Keep the Netgear extender plugged into a working power source.
-
Then, locate the reset hole on your device, and once found, push it using any thin and pointed object.
-
Hold the extender reset hole for several seconds and release it.
-
Kudos! You have reset your Netgear extender.
-
Now, log in to your Netgear extender using http://192.168.1.250 IP, access the Genie setup wizard, follow the provided on-screen instructions, and reconfigure your device.
Experiencing the “Netgear extender not accepting password” issue is the real pain. But, following the fixes mentioned in this article can be the medicine. Thus, make sure you follow the troubleshooting tips in exact given order to deal with the issue from the comfort of your home.
Even after trying the fixes listed above, you are still not getting your Netgear extender password back, then without much delay, drop all your issues whatsoever you are facing with your Netgear extender into the comments section.